conductive piece of fabric formetal vest repair, 5x15cm
Only for metal fabric "Light"Iron onto the defective partSuitable for metal vests and masks ...read more
Product number:
103051
Product information "conductive piece of fabric formetal vest repair, 5x15cm"
- Only for metal fabric "Light"
- Iron onto the defective part
- Suitable for metal vests and masks
Warnings
Caution when ironing on: The tape must only be applied using a suitable iron (without steam) and at a controlled temperature. There is a risk of burns if handled improperly.
Always use a suitable heat-resistant surface and pressing aid (e.g. baking paper or a thin cotton cloth) to protect both the material and the iron.
The tape is not suitable for children.
Do not inhale fumes: When heated, small amounts of vapors may be released. Use only in well-ventilated areas.
Do not store or use the tape near open flames or heat sources.
This repair tape is intended solely for maintenance purposes and is not a substitute for full protective clothing or safety equipment.
A repair using this tape can restore the electrical conductivity of the damaged area, however, the conductivity must be checked with a suitable testing device after application.
Caring and storing instructions
Wash by hand using cold or lukewarm water and a mild detergent.
Do not use fabric sofeners or aggressive cleaning agents, as they may impair the material's conductivity.
Do not spin-dry, wring or tumble-dry. Air drying is recommended.
Afte washing, the electrical conductivity of the repair area should be re-tested.
Store the repair tape in a dry place, flat and protected from direct sunlight.
Avoid high humidity and extreme temperatures, as these may reduce the adhesive performance.
The material should not be folded or creased, as this may damage the conductive surface.
Keep the tape out of reach of children and ideally store it in its original packaging.
Uhlmann Fechtsport GmbH & Co. KG
Uhlandstr. 12
D-88471 Laupheim
tel. +4973929697-0
info@uhlmann-fechtsport.de