connection cable floor/signalling unit, 2.5m
with microphone plug for receiving audio signalslength: 2,5 meter ...read more
Product number:
1316
Product information "connection cable floor/signalling unit, 2.5m"
- with microphone plug for receiving audio signals
- length: 2,5 meter
Warnings
Use the cable exclusively for connecting the floor socket to the scoring box during fencing operations. Any other use may result in malfunction or damage. Before connecting, ensure that all devices are turned off or disconnected from power to prevent short circuits or damage to the connectors.
The cable must only be used with appropriate, standardized connectors. Incorrect connections can damage the cable or connected devices.
Do not pull or bend the cable forefully, especially near the connectors. This can lead to cable breaks or loose contacts.
Keep the cable away from sharp edges, hot surfaces and moisture. These factors can damage the insulation and compromise electrical safety.
Avoid tripping hazards. Lay the cable in such a way that fencers and other individuals are not endangered.
The cable is not suitable for outdoor use or contact with water. Store and use it only in dry environments.
Check the cable regularly for visible damage, especially at the connectors. If damaged, discontinue use immediately and replace the cable.
Repairs must only be carried out by authorized personnel. Unauthorized modifications or repairs may pose safety risks.
Store the cable loosely coiled and without tension to avoid breakage or kinks.
Caring and storing instructions
Clean the cable regularly with a soft, dry or slightly damp cloth. Do not use aggressive cleaning agents or solvents, as these may damage the insulation or connectors. If necessary, carefully clean the connectors with a dry bush or compressed air to remove dust and debris. Make sure no moisture enters the contacts.
Avoid contact with water or other liquids. If the cable becomes wet, allow it to dry completely before using it again.
Store the cable loosely coiled in a dry, clean and well-ventilated area. Avoid direct sunlight, heat sources and high humidity.
Avoid tight bends or sharp angles when coiling the cable to prevent long-term damage to the wires or shielding.
Use cable ties or hook-and-loop straps only loosely to prevent crushing. Do not use metal clamps or rubber bands that may damage the cable.
Store the cable seperately from heavy objects or equipment to avoid pressure marks or deformation.
Regularly inspect the cable for cracks, breaks or corrosion on the connectors. Proper maintenance extends the service life and ensures sage operation.
Uhlmann Fechtsport GmbH & Co. KG
Uhlandstr. 12
D-88471 Laupheim
tel. +4973929697-0
info@uhlmann-fechtsport.de