control unit with 10 ports, for signalling unit installation at training centres
Product information "control unit with 10 ports, for signalling unit installation at training centres"
Warnings
The base unit may only be installed and serviced by trained and qualified personnel.
Before opening the device, disconnect it completely from the power supply.
The base unit is designed for use in dry indoor environments only and must not be exposed to moisture or wet conditions.
Ensure that all modules are correctly inserted and securely locked in place before putting the device into operation.
Avoid any tampering with or modification of the detector connections, as this may impair the system's functionality.
Make sure that no metallic objects accidentally come into contact with open terminals.
In the event of malfunctions or faults, the device must be immediately taken out of service and inspected by authorized personnel.
Access to the main power switch must be guaranteed at all times during training sessions.
The system must be regularly inspected in accordance with the manufacturer's maintenance guidelines to ensure safety and proper operation.
Caring and storing instructions
The base unit must only be cleaned when completely disconnected from the power supply.
Use a soft, dry or slightly damp cloth for cleaning.
Do not use aggressive cleaning agents, solvents, or abrasive substances, as these can damage the surface and internal electronics.
Ventilation openings and connectors should be regularly cleaned of dust and dirt to maintain proper functionality.
Inspect the condition of the modules and connectors regularly for signs of wear or damage.
If the unit is not used for an extended period, store it in a clean, dry and well-ventilated location.
Avoid direct sunlight, high humidity and extreme temperatures.
Protect the unit from mechanical shock and prevent dust ingress during storage.
Before storage, the device must be fully disconnected from the power supply and all modules should be removed or secured.
The base unit must not be disposed of with household waste.
Dispose of the device in accodance with applicable laws and regulations on electronic waste.
Electronic components contain valuable raw materials as well as hazardous substances and must therefore by properly recycled.
In case of doubt, contact an authorized disposal facility or the manufacturer for information on return and disposal options.
Uhlmann Fechtsport GmbH & Co. KG
Uhlandstr. 12
D-88471 Laupheim
tel. +4973929697-0
info@uhlmann-fechtsport.de