measurement accessories for test mode 6
- consisting of electrically insulated cables with connectors
Regular price:
€89.00
(Net price: €74.79)
Planned for production
Product number:
13620-1
Product information "measurement accessories for test mode 6"
- consisting of electrically insulated cables with connectors
Warnings
This measurement accessory is intended exclusively for technical test mode in accordance with the 6T-Box "Competition" standard in fencing and must not be used on fencers during training or competition. The included cables and connectors are electrically insulated but do not provide protection against high voltage or industrial power sources. Use this accessory only with the intended low-voltage testing devices.
Before each use, inspect the measurement accessory for visible damage, broken insulation, or loose connections. Damaged components must not be used, as they may lead to measurement errors.
Ensure that all cable connections are properly and fully inserted to avoid false readings or intermittent contact.
Do not connect or disconnect the accessory while the testing device is powered. Only plug or unplug components when the device is switched off.
Keep the accessory away from moisture, water, high heat or direct sunlight as these can damage the insulation or impair the functionality.
Do not allow children or untrained individuals to use the measurement accessory. It should be used only by qualified or appropriately instructed personnel.
After use, coil the cables neatly without tight bending or twisting to prevent cable breakage and prolong the lifespan of the product.
This accessory should be used only with original components or approved fencing test devices, to ensure technical compatibility and accurate results.
Improper use may lead to malfunctions in the fencing system or incorrect test results. Always follow the test device's user manual and connection guidelines carefully.
Caring and storing instructions
Clean the measurement accessory regularly to ensure proper function and reliable test results.
Use a soft, dry or slightly damp cloth for cleaning. For more stubborn dirt, a mild detergent may be used. Ensure that no liquid enters the connector areas.
Avoid aggressive cleaning agents, solvents, alcohol or abrasive substances, as these can damage the insulation or corrode contact surfaces.
Thoroughly dry the accessory after cleaning before reuse or storage. Moisture can reduce electrical conductivity or cause corrosion.
When handling cables, avoid tight bending, twisting or storing under tension to prevent internal wire breaks and material fatigue.
Store the accessory in a dry, dust-free and well-ventilated location, ideally in a designated storage box or bag.
The storage area should be protected from direct sunlight, high temperatures, moisture and mechanical stress.
After each use, coil the cable loosely and without tension, avoiding knots or pressure points. Label cables if needed to simplify setup for the next use.
Conduct regular visual inspections. Replace any components that are damaged, brittle, or oxidized and do not continue using them.
Uhlmann Fechtsport GmbH & Co. KG
Uhlandstr. 12
D-88471 Laupheim
tel. +4973929697-0
info@uhlmann-fechtsport.de