under floor plug socket BP205-2
€170.00
(Net price: €142.86)
Planned for production
Product information "under floor plug socket BP205-2"
The underfloor outlet is part of the fixed installation and must not be misused or subjected to mechanical stress.
The cover must remain closed at all times and be flush with the floor surface to prevent tripping or injury hazards.
Cables may only be routed through the designated openings. Open or improperly laid cables pose a significant risk during fencing.
It is prohibited to step on the cover with fencing shoes, to use it as a standing surface, or to place sports equipment on it.
No liquids may be spilled in the area of the underfloor outlet, as this may cause short circuits or malfunctions of the network connection.
Maintenance or connection work on the outlet may only be carried out by authorized personnel.
If visible damage is detected (e.g. loose cover, deformations, defective cable outlets), the underfloor outlet must be taken out of service immediately and secured.
During fencing activities, special attention is required, as quick movements increase the risk of accidental contact with cables or the cover.
The cover may only be cleaned with a slightly damp, lint-free cloth.
Abrasive agents, aggressive cleaners, or sharp tools are not permitted, as they may damage the surface and seals.
The area around the outlet must be kept free of dust and dirt on a regular basis to ensure proper closure of the cover.
Cable outlets and seals must be regularly checked for wear and proper function.
As the underfloor outlet is a permanently installed unit, no special storage is required.
Spare parts (e.g. covers or seals) must be stored in a dry, dust-free environment in their original packaging.
Cables connected via the outlet must be carefully coiled after use and stored separately from moisture and mechanical stress.
Defective underfloor outlets must not be disposed of with general waste.
Disposal must comply with applicable regulations for electrical and electronic equipment (ElektroG/WEEE Directive).
Metal and plastic components should, where possible, be separated and recycled.
Disposal must only be carried out by authorized personnel or through certified disposal facilities.